F0846800
2
Basic Experiments on Information and Communication Engineering D2
This course includes the following contents:
[Hardware Course]
- hardware design, making and test of operation, especially Infrared communication circuit.
* This class is conducted in parallel with software programing 4.
Students of this class and software programing 4 are divided into two groups and replaced after 7th week.
[Hardware Course]
- hardware design, making and test of operation, especially Infrared communication circuit.
* This class is conducted in parallel with software programing 4.
Students of this class and software programing 4 are divided into two groups and replaced after 7th week.
[Hardware Course]
The aim of this course is
- understanding basic electronic circuits, especially oscillating circuit, filter
- understanding modulation and demodulation
[Computer Programming]
Students will learn the importance of communication protocol and the principle of error detection in communication, and implement a communication protocol with C programming language.
The aim of this course is
- understanding basic electronic circuits, especially oscillating circuit, filter
- understanding modulation and demodulation
[Computer Programming]
Students will learn the importance of communication protocol and the principle of error detection in communication, and implement a communication protocol with C programming language.
- [Hardware Course]
Understanding features of electrical passive elements and active elements, and its usage - [Hardware Course]
Understanding importance of electric and electronic circuits for electrical communication - [Hardware Course]
Understanding importance of modulation and demodulation on electrical communication - [Computer Programming]
Students can the importance of communication protocol.
Students can the principle of error detection in communication. - [Computer Programming]
Students can implement XMODEM protocol with C programming language.
| Class schedule | HW assignments (Including preparation and review of the class.) | Amount of Time Required | |
|---|---|---|---|
| 1. | [Hardware Course and Software Programming] Guidance - about contents of this course |
Review the contents of Basic Experiments on Information and Communication Engineering A, B, and C | 90minutes |
| Communicate with your group member | 10minutes | ||
| 2. | [Hardware Course] preparation of DC power supply circuit and operation check |
Reading 2nd week's material. | 90minutes |
| Summarize measured data | 90minutes | ||
| 3. | [Hardware Course] About "carrier" and its function for modulation in electrical communication modulation - about oscillating circuit (Astable multi vibrator) - making oscillating circuit as a carrier generator |
Reading 3rd week's material. | 90minutes |
| Summarize measured data | 90minutes | ||
| 4. | [Hardware Course] Operation check and study of Astable multi vibrator - observation of electrical wave for understanding circuit operation - measurement of the relation between RC time constant and oscillating frequency |
Reading 4th week's material. | 90minutes |
| Summarize measured data | 90minutes | ||
| 5. | [Hardware Course] Making and operation check of simple modulation circuit - about simple modulation circuit using logic gate for Infrared communication - Observation and measurement of electrical wave for understanding modulation |
Reading 5thweek's material. | 90minutes |
| Summarize measured data | 90minutes | ||
| 6. | [Hardware Course] Design, making and operation check of electrical signal - Optical signal converter - about usage of FET switch - design, making and operation check of infrared LED drive circuit |
Reading 6th week's material. | 90minutes |
| Summarize measrued data | 90minutes | ||
| 7. | [Hardware Course] Exam - Making and operation check of optical signal receiver and communication test − Submission of final report about infrared communication circuit and basic communication technology, especially modulation and demodulation |
Review the contents of 1st - 6th week class. | 120minutes |
| 8. | [Computer Programming] Introduction. XMODEM receiving manually. |
Reviewing XMODEM receiving manually. | 190minutes |
| 9. | [Computer Programming] XMODEM sending manually. |
Reviewing XMODEM sending manually. | 190minutes |
| 10. | [Computer Programming] XMODEM Packet consistency checking using C programming language. |
Reviewing XMODEM Packet consistency checking using C programming language. | 190minutes |
| 11. | [Computer Programming] XMODEM sender implementation using C programming language. |
Reviewing XMODEM sender implementation using C programming language. | 190minutes |
| 12. | [Computer Programming] XMODEM receiver implementation using C programming language. |
Reviewing XMODEM receiver implementation using C programming language. | 190minutes |
| 13. | [Computer Programming] XMODEM communication for various types of file. |
Reviewing XMODEM communication for various types of file. | 190minutes |
| 14. | [Computer Programming] End-term examination and review. |
190 | 190minutes |
| 15. | − | − | |
| Total. | - | - | 2450minutes |
| [Hardware Course] Short report | [Hardware Course] Final report | [Computer Programming] Reports | [Computer Programming] Exam. | Total. | |
|---|---|---|---|---|---|
| 1. | 10% | 10% | |||
| 2. | 15% | 10% | 25% | ||
| 3. | 5% | 10% | 15% | ||
| 4. | 10% | 23% | 33% | ||
| 5. | 5% | 12% | 17% | ||
| Total. | 30% | 20% | 15% | 35% | - |
More than 2 times of absence regards as course abandonment.
And, late arraivals to class without just cause is treated as penalty point.
[Hardware Course]
Evaluation depends on 4 reports and final report on last class.
[Computer Programming]
Reports (15%) and term-end examination (35%).
And, late arraivals to class without just cause is treated as penalty point.
[Hardware Course]
Evaluation depends on 4 reports and final report on last class.
[Computer Programming]
Reports (15%) and term-end examination (35%).
[Hardware Course]
Textbook :
Handouts of this course
Reference materials :
There are many references about logic circuit design. You should choose books suitable for yourself.
[Computer Programming]
http://www.sic.shibaura-it.ac.jp/~kanzawa/soft4/
Textbook :
Handouts of this course
Reference materials :
There are many references about logic circuit design. You should choose books suitable for yourself.
[Computer Programming]
http://www.sic.shibaura-it.ac.jp/~kanzawa/soft4/
[Hardware Course]
- Read handouts before class participation.
- Squared paper is required.
[Computer Programming]
Grade B or greater in the subject: "Basic Experiments on Information and Communication Engineering C", or equivalent skill.
- Read handouts before class participation.
- Squared paper is required.
[Computer Programming]
Grade B or greater in the subject: "Basic Experiments on Information and Communication Engineering C", or equivalent skill.
- [Hardware Course]
Before and after class
By e-mail (saitoa@sic.shibaura-it.ac.jp) - [Computer Programming]
Monday 12:30-13:00
The lecturer recommends making appointment in advance.
- Course that cultivates an ability for utilizing knowledge
- Course that cultivates a basic interpersonal skills
| Work experience | Work experience and relevance to the course content if applicatable |
|---|---|
| N/A | N/A |
Last modified : Sat Mar 21 13:10:39 JST 2020