The main aims of this course are to deepen knowledge and understanding of electric materials in order to improve engineering
design ability.
We will focus on basic knowledge from the viewing points of material science.
We will focus on basic knowledge from the viewing points of material science.
The aim of this class is to help students master the basic knowledge of electric materials and their applications.
It starts with electrical and magnetic properties of the materials based on atoms and molecules.
Next, students should be able to understand the basic concepts of conductor, dielectrics, insulators, semiconductors and magnets.
Upon successfully completion of the course, students can get many basic knowledge about the physical properties and their applications in highly industrialized society.
It starts with electrical and magnetic properties of the materials based on atoms and molecules.
Next, students should be able to understand the basic concepts of conductor, dielectrics, insulators, semiconductors and magnets.
Upon successfully completion of the course, students can get many basic knowledge about the physical properties and their applications in highly industrialized society.
- Capable to explain material phenomenon.
- Capable to explain conductor material.
- Capable to explain resistance material.
- Capable to explain semiconductor material.
- Capable to explain inductive and insulation conductor material.
- Capable to explain magnetic material.
| Class schedule | HW assignments (Including preparation and review of the class.) | Amount of Time Required | |
|---|---|---|---|
| 1. | 1 Guidance about electric materials 1.1 Material state and number density of atoms 1.2 Various materials 1.3 Structure of materials |
Bohr atom model | 120minutes |
| 2. | ２ Fundamentals of electric materials 2.1 Electron and structure of materials 2.2 Chemical bond and energy band |
Structure of materials | 120minutes |
| 3. | 3 Conductor material 3.1 Conductivity and its mechnism 3.2 Variation of conductivity by temperature |
Conductivity and its mechnism | 120minutes |
| 4. | 3.3 Wire and cable | Variation of wire and cables | 120minutes |
| 5. | 3.4 Resistor and heater 3.5 Wire, contactor, bonding material 3.6 Interfacial phenomena 3.7 Superconductor |
Application of conductive materials | 120minutes |
| 6. | ４ Semiconductor materials 4.1 What is semi conductors? 4.2 Silicone and intrinsic semiconductor 4.3 Impurity semiconductor |
Application of semiconductor | 120minutes |
| 7. | 4.4 Diode 4.5 Transistor |
Principle of diode and trasistor | 120minutes |
| 8. | 4.6 Compound semiconductor 4.7 Manufacturing process of semiconductor 4.8 Manufacturing process of CMOS |
Band theory | 120minutes |
| 9. | ５ Dielectric materials 5.1 Basic properties if dielctrics 5.2 Dielctrics and polarization 5.3 Capacitor |
General requirement of gas insulation | 120minutes |
| 10. | 5.4 Variety of insulation materials and application (1) Gas insulation (2) Liquid insulation |
Variety of insulation materials and their properties | 120minutes |
| 11. | (3)Solid state insulations ・Inorganic insulators ・Organic insulators 5.5 Variety of dielcteics and application |
Variety of dielcteics and application | 120minutes |
| 12. | ６ Magnetic material 6.1 What is magnetic materials? 6.2 Mechnism of magnetization 6.3 Variety of magnetic materials |
Review for B-H curve and variety of magnetic materials | 120minutes |
| 13. | 6.4 ferromagnetic material 6.5 Examples of ferromagnetic material |
Review for B-H curve and application of ferromagnetic material | 120minutes |
| 14. | Discussion on latest topics | preparing the report for discussion | 120minutes |
| Total. | - | - | 1680minutes |
| 1,2,3 | 4 | 5 | 6,7,8 | 9-14 | Total. | |
|---|---|---|---|---|---|---|
| 1. | 20% | 20% | ||||
| 2. | 20% | 20% | ||||
| 3. | 10% | 10% | ||||
| 4. | 20% | 20% | ||||
| 5. | 15% | 15% | ||||
| 6. | 15% | 15% | ||||
| Total. | 20% | 20% | 10% | 20% | 30% | - |
Your final grade will be calculated according to the following process:
Reports including score ring 60%
Term-end examination 40%
To pass, students must earn at least 60 points out of 100 that is minimum requirement to satisfy the goals an objectives.
Reports including score ring 60%
Term-end examination 40%
To pass, students must earn at least 60 points out of 100 that is minimum requirement to satisfy the goals an objectives.
Textbook
(In Japanese) 湯本、青柳、鈴木、田中、松本「基本からわかる電気電子材料」、オーム社 ISBN978-4-274-21742-5
Reference materials (In Japanese)
(1) 大木、石原、奥村、山野、「電気電子材料」、電気学会ISBN4-88686-252-7
(2) 西川宏之、「電気電子材料工学」数理工学社 ISBN978-4-86481-005-0
(3) 柳井、中井、林：“基礎電気材料”(実教出版,1976)
(In Japanese) 湯本、青柳、鈴木、田中、松本「基本からわかる電気電子材料」、オーム社 ISBN978-4-274-21742-5
Reference materials (In Japanese)
(1) 大木、石原、奥村、山野、「電気電子材料」、電気学会ISBN4-88686-252-7
(2) 西川宏之、「電気電子材料工学」数理工学社 ISBN978-4-86481-005-0
(3) 柳井、中井、林：“基礎電気材料”(実教出版,1976)
The students are expected to read the magazines, journals and newspapers to obtain the latest information about electric materials.
- Wed 12:30-16:40 at Toyosu Campus
Room No. :11F 11G32 - TEL: 03-5859-8213
- Course that cultivates an ability for utilizing knowledge
| Work experience | Work experience and relevance to the course content if applicable |
|---|---|
| N/A | N/A |
- 4.QUALITY EDUCATION
- 7.AFFORDABLE AND CLEAN ENERGY
- 9.INDUSTRY, INNOVATION AND INFRASTRUCTURE
- 12.RESPONSIBLE CONSUMPTION & PRODUCTION
Last modified : Sat Sep 11 04:05:54 JST 2021