・In the first half, students will learn some principles of mechanical drawing (third triangular projection drawing method),
which are necessary for product design, by measuring actual products (tableware, electronic equipment, stationery, and furniture)
and drawing them by hand.
・In the second half, based on students' own ideas, they will design and draw products by hand, make models based on the drawings, present the drawings and models on presentation boards, and give oral presentation in the end.
・This class is arranged as an introductory class to the elective compulsory courses for production and product design course students, which are arranged in the latter half of the first year, such as these:
・In "Practice on Basic Design", students will design and make models of their original designs by sketching, drafting, prototyping, and modeling.
・In "Practice on Basic Drawing", students will learn mechanical drafting with CAD (Computer Aided Design).
・In the second half, based on students' own ideas, they will design and draw products by hand, make models based on the drawings, present the drawings and models on presentation boards, and give oral presentation in the end.
・This class is arranged as an introductory class to the elective compulsory courses for production and product design course students, which are arranged in the latter half of the first year, such as these:
・In "Practice on Basic Design", students will design and make models of their original designs by sketching, drafting, prototyping, and modeling.
・In "Practice on Basic Drawing", students will learn mechanical drafting with CAD (Computer Aided Design).
・The purpose of this class is to learn some principles of mechanical drawing, which are necessary for production and product
design course students, through hand-drawn drafting of actual measurement drawings of various kind of products, and drafting,
model making, and presentation of original design products.
・Thus, this class is supposed to be introduction to the elective compulsory classes "Practice on Basic Design" and "Practice on Basic Drawing" for production and product design course students, which are arranged in the latter half of the first year.
・Thus, this class is supposed to be introduction to the elective compulsory classes "Practice on Basic Design" and "Practice on Basic Drawing" for production and product design course students, which are arranged in the latter half of the first year.
- Students will be able to measure various products and draw their actual measurements.
- Students will be able to design and draft based on their own ideas and make models.
- Students will be able to present their ideas (drafting & models) together on presentation boards.
| Class schedule | HW assignments (Including preparation and review of the class.) | Amount of Time Required | |
|---|---|---|---|
| 1. | ■ Class guidance ・ Explanation of plans and tools ■ Introduction to Descriptive Geometry and Drafting Method ・ Third triangular projection ・ JIS mechanical drafting rules |
Students should read some mechanical drawing reference books. Prepare measuring tools, drafting tools, paper, crafting tools, and crafting materials. |
90minutes |
| 2. | ■ Actual measurement drawing of tableware (1) ・ Trace of the actual measurement sample drawing of the mug |
Project [1] Trace of the actual measurement sample drawing of the mug | 90minutes |
| 3. | ■ Actual measurement drawing of tableware (2) ・ Measurement of mugs ・ Drafting of actual measurement drawings of mugs |
Project [2] Actual measurement drawing of a mug | 90minutes |
| 4. | ■ Actual measurement drawing of electronic devices (1) ・ Measurement of smartphones ・ Drafting of actual measurement drawings of smartphones |
Project [3] Actual measurement drawing of a smartphone | 90minutes |
| 5. | ■ Actual measurement drawing of electronic devices (2) ・ Measurement of outer cases of laptop PCs ・ Drafting of actual measurement drawings of outer cases of laptop PCs |
Project [4] Actual measurement drawing of an outer case of a laptop PC | 90minutes |
| 6. | ■ Actual measurement drawing of Stationery (1) ・Measurement of scissors ・Drafting of actual measurement drawings of scissors |
Project [5] Actual measurement drawing of a pair of scissors | 90minutes |
| 7. | ■ Actual measurement drawing of Stationery (2) ・ Measurement of mechanical pencils ・ Drafting of actual measurement drawings of mechanical pencils |
Project [6] Actual measurement drawing of a mechanical pencil | 90minutes |
| 8. | ■ Actual measurement drawing of furniture (1) ・ Measurement of classroom chairs ・ Drafting of actual measurement drawings of classroom chairs |
Project [7] Actual measurement drawing of a classroom chair | 90minutes |
| 9. | ■ Actual measurement drawing of furniture (2) ・ Measurement of classroom tables ・ Drafting of actual measurement drawings of classroom tables |
Project [8] Actual measurement drawing of a classroom table - 2 different modes: normal use mode / tilt top table mode | 90minutes |
| 10. | ■ Idea sketches of original product designs ・ Idea sketches of original product designs |
Project [9] Idea sketches of original product designs | 90minutes |
| 11. | ■ Drafting of original product designs ・ Design and drafting of original products |
Project [10] Drawing of an original product design | 90minutes |
| 12. | ■ Model making of original product designs ・ Model making of original product designs |
Project [11] Photos of the model | 90minutes |
| 13. | ■ Preparation for presentation of original products ・ Catch up on delayed work ・ Production of presentation boards (design drawings / photos) |
Project [12] Presentation board | 90minutes |
| 14. | ■ Final presentation / comment ・ Oral presentation ・ Comment |
Project [13] Oral presentation manuscript | 90minutes |
| Total. | - | - | 1260minutes |
| Final Project | Total. | |
|---|---|---|
| 1. | 60% | 60% |
| 2. | 30% | 30% |
| 3. | 10% | 10% |
| Total. | 100% | - |
・Grades are evaluated only on the "final project", which are Projects [10][11][12]+Oral Presentation (out of 100), and a score
of 60 or higher is passed.
・The final projects (Projects [10][11][12]+Oral Presentation) are evaluated on a four-point scale of "S / A / B / C". Details of the evaluation items and rules are shown separately in "Rubric".
・Submitting all the "weekly projects" (Projects [1] - [13]) is a condition for evaluating the "final projects".
・One point will be deducted from the score of the final projects for each overdue submission of the weekly projects (*).
* However, in the case of unavoidable circumstances, such as poor physical condition or attending close relative's funeral, this rule will nor be applied, on the condition that the student must declare that fact by email before the deadline of the weekly projects and afterward submit a photo of the evidence (doctor's medical certificate, clinic receipt, pharmacy receipt, mourning information, etc.) by email.
・The final projects (Projects [10][11][12]+Oral Presentation) are evaluated on a four-point scale of "S / A / B / C". Details of the evaluation items and rules are shown separately in "Rubric".
・Submitting all the "weekly projects" (Projects [1] - [13]) is a condition for evaluating the "final projects".
・One point will be deducted from the score of the final projects for each overdue submission of the weekly projects (*).
* However, in the case of unavoidable circumstances, such as poor physical condition or attending close relative's funeral, this rule will nor be applied, on the condition that the student must declare that fact by email before the deadline of the weekly projects and afterward submit a photo of the evidence (doctor's medical certificate, clinic receipt, pharmacy receipt, mourning information, etc.) by email.
【Textbooks】
・Not specified.
【Reference Books】
・吉澤武男・他『新編JIS機械製図』第5版，森北出版，2014年 (Only in Japanese)
・清水吉治・川崎晃義 『プロダクトデザインのための製図』日本出版サービス，2000年 (Only in Japanese)
・飯島晃良『はじめてでもよくわかる図面の描き方』成美堂出版，2021年 (Only in Japanese)
- Look for other books on mechanical drawings in English or other languages.
【Handouts】
・Delivered occasionally through Scomb.
・Not specified.
【Reference Books】
・吉澤武男・他『新編JIS機械製図』第5版，森北出版，2014年 (Only in Japanese)
・清水吉治・川崎晃義 『プロダクトデザインのための製図』日本出版サービス，2000年 (Only in Japanese)
・飯島晃良『はじめてでもよくわかる図面の描き方』成美堂出版，2021年 (Only in Japanese)
- Look for other books on mechanical drawings in English or other languages.
【Handouts】
・Delivered occasionally through Scomb.
- Q&A time will be held in the classroom after class.
- Inquiries by email are also possible.
- Course that cultivates a basic problem-solving skills
- Course that cultivates an ability for utilizing knowledge
- Course that cultivates a basic self-management skills
| Work experience | Work experience and relevance to the course content if applicable |
|---|---|
| Applicable | ・The professor will teach the principles of mechanical drawing (third triangular projection) by utilizing the practical experience
of designing and drawing furniture and interior products. ・Students will tackle those practical tasks: they will actually measure various products (tableware, electronic devices, stationery, and furniture) and draw the actual measurement drawings. Then, based on their own ideas, they will design and draw their original product designs, make models, and present drawings and models together on presentation boards. |
- 4.QUALITY EDUCATION
- 9.INDUSTRY, INNOVATION AND INFRASTRUCTURE
- 12.RESPONSIBLE CONSUMPTION & PRODUCTION
Last modified : Fri Mar 18 22:04:56 JST 2022