This course focuses on design techniques of electronic circuits as well as application based system design. Students will
learn basic design techniques and trade-offs in electronic circuits design. The design of basic circuit blocks such as amplifiers,
filters, oscillators and power converters will be used as an example to learn the basic design techniques and trade-offs between
power, speed and noise.
The purpose of this class is to develop a basic understanding of electronic circuits design such as design techniques, design
flow (from specification to verification) and trade-offs.
- The students can understand and explain the function of basic circuit blocks
- The students can understand the basic procedure in electronic circuits and systems design
- The students can understanding the basic trade-offs in circuit design
| quiz | assignment 1 | assignment 2 | Total. | |
|---|---|---|---|---|
| 1. | 10% | 20% | 20% | 50% |
| 2. | 5% | 5% | 5% | 15% |
| 3. | 5% | 15% | 15% | 35% |
| Total. | 20% | 40% | 40% | - |
| Class schedule | HW assignments (Including preparation and review of the class.) | Amount of Time Required | |
|---|---|---|---|
| 1． | Course introduction and overview of electronic circuits and systems design | Review basic circuit theorem (Ohm's law, etc.) | 200minutes |
| 2． | Review on MOS transistor and its trade-off Essential points in integrated circuits design |
Review MOS transistor principle | 100minutes |
| Review basic semiconductor process | 100minutes | ||
| 3． | Amplifiers 1 | Review amplifiers and their applications | 200minutes |
| 4． | Amplifiers 2 | Review amplifiers and their applications | 200minutes |
| 5． | Oscillators 1 | Review feedback theory, stability criterion | 100minutes |
| Review oscillator principle | 100minutes | ||
| 6． | Oscillators 2 | Review oscillator type and various implementations | 200minutes |
| 7． | Filters 1 | Review LCR circuits | 200minutes |
| 8． | Filters 2 | Review various filters implementation | 200minutes |
| 9． | Power Converters 1 | Review diode, inductor characteristic | 100minutes |
| Review switching power supply | 100minutes | ||
| 10． | Power Converters 2 | Review linear regulators and LDO | 200minutes |
| 11． | Analog-to-Digital Converters 1 | Review comparators, thermometer coding, binary coding | 200minutes |
| 12． | Analog-to-Digital Converters 2 | Review flash and sub-ranging AD converters | 200minutes |
| 13． | Digital Circuits 1 | Review digital gates (AND, OR, NOT, etc) | 100minutes |
| Review Karnaugh map | 100minutes | ||
| 14． | Digital Circuits 2 | Review half adder, full adder | 200minutes |
| Total. | - | - | 2800minutes |
Quiz 20pts + Assignments 80pts = 100pts (total point)
Students will earn the credits by fulfilling the following conditions:
1. Earn at least 60% from the total point
2. Submit all assignments
Students will earn the following evaluation from the assignments:
1. 60% if they can explain the function of basic circuit blocks and answer basic calculation problems
2. 70% if they can determine the circuit requirements from a given specification
3. 80% if they can explain the design trade-offs
4. 90% if they can derive a proper design steps considering the trade-offs
Students will earn the credits by fulfilling the following conditions:
1. Earn at least 60% from the total point
2. Submit all assignments
Students will earn the following evaluation from the assignments:
1. 60% if they can explain the function of basic circuit blocks and answer basic calculation problems
2. 70% if they can determine the circuit requirements from a given specification
3. 80% if they can explain the design trade-offs
4. 90% if they can derive a proper design steps considering the trade-offs
| ways of feedback | specific contents about "Other" |
|---|---|
| Feedback in the class |
This course does not need any textbook, but any materials related to the lecture will be used as references. Handout will
be provided at the beginning of each lecture or published on the web site at least a day before the lecture.
Students who want to take this course are required to have a basic knowledge on electronic circuits analyses such as the understanding
of Ohm’s Law, Kirchhoff’s Law, complex notation, Laplace transform, etc. It is also advisable for the students to have a basic
understanding on device characteristic of MOS transistor though quick review will be given in the lecture.
- 15:00 -17:00 on each lecture day (any change will be announced during the lecture)
- Make an appointment in advance for any other time not described above.
Contact address: nico[at]shibaura-it.ac.jp
- Course that cultivates an ability for utilizing knowledge
- Course that cultivates a basic interpersonal skills
| Work experience | Work experience and relevance to the course content if applicable |
|---|---|
| N/A | N/A |
- 4.QUALITY EDUCATION
- 9.INDUSTRY, INNOVATION AND INFRASTRUCTURE
Last modified : Sat Mar 02 04:32:51 JST 2024