Course title
C00140002
Graphics and Drawings 1

 INOUE Shigeru

YUMOTO Atsushi
Course description
This course deals with basic concepts and principles of mechanical design and drawing.
Design is one of creating work in the engineering field. Drawing is used at a making site of industrial good, and making a part is advanced with the directions. Therefore, drawing is the one like a word of everyone commonness to which easiness expressed designer's aim clearly faithfully and moreover most also is equivalent to a making guide book to a manufacturer.
Such drawing is the one which illustrated the shape, the size, the data, the machining method and the structure by using line, character and symbol. And we have to draw according to follow JIS (Japanese Industrial Standards).
We will focus on actual drawing manner, as well as theoretical foundation of drawing.
Purpose of class
Since the drawing is equal to a word for an engineer, and if there is not enough understanding ability of drawing, an engineer has some problem in daily business. An abundant spatial imagination and a close operational way are needed to write and read a drawing. The purpose of this course is to help student’s master the basic ability with drawing and design, including how to draw in order to make easy understand to an operator of machining.
Goals and objectives
  1. It's possible to understand third angle projection and draw an simple mechanical parts accordingly.
  2. It's possible to understand an easy mechanical drawing.
  3. It can be understood between the 3rd angle modelling of the product and the drawing.
Relationship between 'Goals and Objectives' and 'Course Outcomes'

 every drawings oral exam Total.
1. 25% 5% 30%
2. 25% 5% 30%
3. 30% 10% 40%
Total. 80% 20% -
Evaluation method and criteria
Every drawings must be finished till appointed time and date and oral exam related drawing method must be cleared at least 60 points out of 100. Then, your final grade will be calculated according to the following process: every drawings 80%, oral exam 20%. To pass students must earn 60% out of 100%
You can earn 60% if the usage of line and dimensioning are correctly
In addition, you can earn 80% if the selection of the section plane with number of plain and indication of machining method are correctly
Language
Japanese(English accepted)
Class schedule

 Class schedule HW assignments (Including preparation and review of the class.) Amount of Time Required
1. Guidance
What is the aim of this course, and the relation between the design and the drawing. 		Homework must be finished till appointed time and date． 180minutes
2. Projection
The kind of projections, third angle projection, first angle projection and three side figures 		Homework must be finished till appointed time and date． 180minutes
3. Projection
Three sides figures and axonometric projection. 		Homework must be finished till appointed time and date． 180minutes
4. Practice 1 of drawing
How to choose main projection, the kind of lines and purpose of usage, the actual drawing of figure 		Homework must be finished till appointed time and date． 200minutes
5. Practice 2 of drawing
Drawing of an auxiliary view, a partial projection and a section view 		Homework must be finished till appointed time and date． 180minutes
6. Practice 3 of drawing
Dimensioning method, number and dimensioning 		Homework must be finished till appointed time and date． 180minutes
7. Screw and bolt drawing 1
The kind of screws and usage, screw drawing, the kind of bolt and nuts with usage, simple drawing of them 		Homework must be finished till appointed time and date． 180minutes
8. Screw and bolt drawing 2
Modal strength of the bolt and nut, and dimensioning method 		Homework must be finished till appointed time and date． 200minutes
9. Key and pin drawing 1
How to put it in with the size in the particle projection drawing, dimensioning method on the hole and the key way 		Homework must be finished till appointed time and date． 180minutes
10. Key and pin drawing 2
Directions of a special application 		Homework must be finished till appointed time and date． 180minutes
11. Key and pin drawing 3
Material mark and machining method 		Homework must be finished till appointed time and date． 180minutes
12. Gear drawing 1
The strength of the gear, the material mark, dimensions and the specifications, easy drawing method 		Homework must be finished till appointed time and date． 200minutes
13. Gear drawing 2
Fit tolerance, dimensional tolerance and the surface roughness 		Homework must be finished till appointed time and date． 180minutes
14. Examination and the explanation of exam based upon JIS drawing method Homework must be finished till appointed time and date． 240minutes
Total. - - 2640minutes
Feedback on exams, assignments, etc.
ways of feedback specific contents about "Other"
授業内と授業外でフィードバックを行います。
Textbooks and reference materials
Textbook: Syosinnsya no tameno kikai seizu Fujimoto, Gomaki & 4 other 　Morikita syuppan

Kikai sekkei seizu no kiso Tukada tadao Suurikougaku sya
JIS standard （B0001,B0026,B0028,Z3021,Z8310,others）
JIS hand book drawing Japanese Standards Association
Kikai seizu manual Japanese Standards Association
Sinnhenn kikai sekkei sezuhou Sekkei seizu kennkyuu kai Morikita syuppann
Prerequisites
Nothing special
Office hours and How to contact professors for questions
  • After the session in a lecture day of a week
Regionally-oriented
Non-regionally-oriented course
Development of social and professional independence
  • Course that cultivates a basic interpersonal skills
  • Course that cultivates an ability for utilizing knowledge
Active-learning course
N/A
Course by professor with work experience
Work experience Work experience and relevance to the course content if applicable
Applicable The fundamental manners of drawing is indispensable for mechanical design , is instructed using the long time experience engaged in design drawing of machine tools.
Education related SDGs:the Sustainable Development Goals
  • 4.QUALITY EDUCATION
  • 9.INDUSTRY, INNOVATION AND INFRASTRUCTURE
Last modified : Sat Mar 08 04:30:41 JST 2025